| Groove: |
For internal groove
measurement. Various anvil forms available. Diameters from
6-100mm. |
| Thread: |
Thread forms available
as 3 point system. |
| Special Length:
|
Diameters from 2-6mm
can be supplied. Length dependent on diameter. |
| Spherical Radius:
|
Can be supplied
as a 2 point for ovality or 3 point contact. Available from
6-100mm 2 point, 6-300mm 3 point. |
| Slot width (large):
|
Slot widths from
3-100mm. |
| Plain Diameter:
|
Available from 6-150mm
diameter. Blind bore below 12.5mm if required |
| 'O' Ring, Ball
Race: |
For size from 2-300mm
diameter. Can be inter-changeable with standard anvils on
some systems. |
| Internal Splines:
|
2
point heads machined to suit particular spline. Pitch diameter
heads fitted with precision ground carbide rollers. Sizes
available from 16-300mm diameter. |
| External Splines:
|
Pitch diameter frames
fitted with carbide ball and roller. interchangeable plungers
to suit requirements. |
| Internal Screw
Thread: |
To measure effective
(functional) diameter, pitch diameter, major diameter, between
M4-300mm. No. 8 UN-12" diameter. |
| External Screw
Thread: |
For pitch diameter
measurement from 2-100mm metric and UN forms. Other forms
by special request. Plunger tips interchangeable. |
| Taper: |
Set using distance
between heads. Point contact on bore using carbide balls.
3 point also available. |
| 3 Point Spherical:
|
Gives good repeatability
even when out of line with bore centres. Available from 3-300mm
diameter on digital systems. |
| Irregular Spacing:
|
Available between
16-300mm diameter to measure between odd spaced lobes. |
| Deep Hole: |
Depths to 8 metres
available above 50mm diameter. |
| Depthmatic: |
Fast slide action
Depth Gauge 0-300mm. Inter-changeable contact tips: Ball,
Needle, Standard, Flat. |
