|
|
 |
| |
Wyler blueSYSTEM
| 
|
The new blueSYSTEM from Wyler AG of Switzerland is a further enhancement of the well known and establised line of levels for machine tool inspection and surface measurement.
The new system combines the latest sensor & pendulum technology with wireless data transmission over the international Bluetooth standards. |
| New
innovations |
A typical blueSYSTEM consists of one or two instruments communication to either a blueMETER or connected to a PC with evaluation software.
This newest generation of high precision electronic inclination measurement instruments are especially suited to measure flattness of surface plates or the geometry of machine tools. |
 |
| Application Specific Machine Tool Software |
| |
 |
New MT-SOFT Software allows the possibility to directly measure single machine components and store tese datas for final comparison to a theoretically perfect machine. This way the overall structure and accuracy can be ascertained, even on complex machine tools.
E.g. The vertical rotating axis can be put in relation to the horizontal guideways. |
|
|
|
| Key blueSYSTEM Features |
- Compact and pleasant design which is functionally optimised for precision
measurement
• Wireless data transmission based on the internationally approved Bluetooth
™-standard
• Large and well readable LCD display which can be read from both sides
since the handle can be rotated
• Each instrument has its own specific address allowing the use of several
independent systems in the same room without interfering with each other
• Since each instrument has a built in IR receiver, the measurement can be
initiated at any instrument
• There are 3 sensitivities available:
• BlueLEVEL 1 μm/m: Range ±20mm/m
• BlueLEVEL 5 μm/m: Range ±100mm/m
• BlueLEVEL 10 μm/m: Range ±200mm/m
• Linearity according to DIN 2276
• All instruments are equipped with RS 232 / RS 422 /
RS 485 interfaces
• Powered by standard 1.5 V batteries type “C”
• In compliance with CE regulations and all applicable EMC regulations
|
| Altia Height Gage Specifications |
Available
Ranges:
|
0-14"/305mm
| 0-18"/610mm*
0-24"/567mm | 0-28"/872mm* |
| Resolution: |
0.00005"/(0.001mm/1um) |
| Measuring
Pressure: |
Approx.
0.8 Newtons |
| Accuracy
(STD): |
|
| Altia 350 |
.00059 (15um) |
| Altia 600 |
.00079 (20 um) |
| Repeatbility: |
2 um (.000080") |
| Output
Type: |
RS-232
C (Bi-Directional) |
| Display: |
Bright LCD w/Embedded Technology |
| Interface
Connections: |
RS232 |
| Operational
Temperature: |
+10°
to +40° C |
| Power
Supply: |
Rechargeable
Battery Pack (30 Hours) |
| Total
Height : |
25.4"/645mm
| 37.4"/950mm | |
| Weight: |
10kg
| 12kg |
*by using the upper probe holder
If you would like
more information or a flyer on the Altia, simply
fill out our Information Request Form,
or contact our office.
|
|
|
|
|
